TR10 U-Shape

Description

The Remote-Head TR10 has a modular design. This technology provides a wide variety of different variations in a very cost-effective way.
One wrench allen key is needed to assemble or disassemble the 2-axis-system at location and scale it in an optimum way to the actual needs.
The remote-head can be downsized or extended by the use of the spacer-tube-technology.
All parts are resistant to weathering and sealed waterproof to IP65, including the connectors.

The Remote-Head TR10 U consists of:

2 Drive-modules (identical)

1 Base Tube

The base-tube is connected to the pan-drive-module
At both ends it carries the side support

2 Tilt axis Hinge bracket

the hinge bracket suports the tilt axis und increases the payload up to 5kg

2 Spacer-tube-system

The side support consists of 4 spacer tubes each and is connected to the tilt-module and hinge bracket.
adjustment of spacer-tube-system to the actual needs.
a second spacer-tube-system supports the camera-plate and is connected to tilt-module and hinge bracket
this spacer-tube system contrlos the c.o.g.

1 Camera plate with clamps

Camera plate provided with clamps is connected to spacer-tube-system
The camera is outbalanced by the use of the clamps

Different head-versions and various peripherical constellations are in download

Technical Specification

Material                       ALU
Class:                           IP65
Dimension:                  300x300x105mm
Weight:                        1.7kg

Payload: 5kg
Axis: Pan/Tilt

Voltage:                     12V
Current:                      3A
Drive:                          DC-Motor

Gear drive:                  friction
Resolution P/T             app. 400.000steps/360°
Turning speed             360° in 2s
Pos. accuracy:            app. 0.001°

Control                         Joystick

Servo-elektronics:      external
Connection                 cable

Alternative
- TR10 L-shape