TR20 Roll-axis

TR20 roll-axis

Description

The Remote-Head TR20 has a modular design. This technology provides a wide variety of different variations in a very cost-effective way.
One wrench allen key is needed to assemble or disassemble the 3-axis-system at location and scale it in an optimum way to the actual needs.
The remote-head can be downsized or extended by the use of the spacer-tube-technology.
All parts are resistant to weathering and sealed waterproof to IP65, including the connectors.

The Remote-Head TR20 R consists of:

3 Drive-modules (indentical)

1 Base tube

The base tube is mounted to the pan-drive-module and carries the side support

1 Tilt axis Hinge bracket

The hinge bracket suports the tilt axis und increases the payload up to 10kg

2 Spacer-tube-system

The side support conists of 4 spacer tubes each and is connected to the tilt-module and hinge bracket.
Adjustment of spacer-tube-system to the actual needs.
A second spacer-tube-system is mounted to tilt-module and hinge bracket and supports the camera-carrying support

2 Cameracarrying support/ Camera plate with clamps

The roll-drive-module is mounted to the camera-carrying- support-plate and carries the camera plate
The camera plate can be adjusted by spacer-tube-system to balance the camera

Different head-versions and various peripherical constellations are in download

Technical Specification

Material                       ALU
Class:                           IP65
Dimension:                  500x500x135mm
Weight:                        6.6kg

Payload: 10kg
Axis: Pan/Tilt/Roll

Voltage:                     12V
Current:                      6A
Drive:                          DC-Motor

Gear drive:                  friction
Resolution P/T             app. 400.000steps/360°
Turning speed             360° in 2s
Pos. accuracy:            app. 0.001°

Control                        Joystick

Servo-elektronics:      external
Connection                 cable