TR20 U-shape tube

Description

The Remote-Head TR20 has a modular design. This technology provides a wide variety of different variations in a very cost-effective way.
One wrench allen key is needed to assemble or disassemble the 2-axis-system at location and scale it in an optimum way to the actual needs.
The remote-head can be downsized or extended by the use of the spacer-tube-technology.
All parts are resistant to weathering and sealed waterproof to IP65, including the connectors.

The Remote-Head TR20 U S consists of:

2 Drive-modules (identical)

1 Tilt axis Hinge bracket

the hinge bracket suports the tilt axis und increases the payload up to 15kg

1 Base tube

The base tube is mounted to the pan-drive-module and carries side support

2 Spacer-tube-system

The side support conists of 4 spacer tubes each and is supports tilt-drive-module and hinge bracket.
adjustment of spacer-tube-system to the actual needs.
a second spacer-tube-system is connected tilt-module and hinge bracket and supports the camera plate
The c.o.g. of the camera is adjusted by the spacer-tube-system

1 Camera plate with clamps

Camera plate provided with clamps is connected to spacer-tube-system
The Camera is balanced by using the clamps

Different head-versions and various peripherical constellations are in download

Technical Specification

Material                       ALU
Class:                           IP65
Dimension:                  500x500x135mm
Weight:                        6.0kg

Payload: 15kg
Axis: Pan/Tilt

Voltage:                     12V
Current:                      4A
Drive:                          DC-Motor

Gear drive:                  friction
Resolution P/T             app. 400.000steps/360°
Turning speed             360° in 2s
Pos. accuracy:            app. 0.001°

Control                         Joystick

Servo-elektronics:      external
Connection                 cable