TR3 L-shape
Description
The TR3 Remote-Heads are extremely robust. Numerous systems are in use for many years, operating in difficult enviroments. The combination with the high end electronics results in unrivalled smooth and jerk-free movements.
The free of flackness motor-gear-unit drives the axes noise-free by means of a special tooth-belt. By a high-resolution incremental encoder the motions of the axes are digitally captured. Due to the hollow shaft construction the application of MIL-sliprings is possible, there is no rotation limitation.
A 32-Bit microprocessor provides the necessary control accuracy and the necessary software-transfer to the servo-electronic.
In detail:
- payload 40 kg.
- Corpus DUR-Aluminium ; NC-milled
- Pan-und Tilt-axis fitted with 130 mm fourpoint-ballbearing
- Flackless motor-gear-unit (friction-wheel)
- Axis-drive by tooth-belt (low level noise)
- High-resolution encoders for digitally motion control of the axes
- Sliprings in MIL-application
- Head mounting with halfball, flat base or Mitchell adapter
- Electrical conections positioned at the flanch of the pan/tilt-axes
- two bubbles to level the head
- drive-electronics intgrated (32 Bit micro-processor)
- Teach-in operation up to 8 minutes for all axes (P/T/Z/F/I)
ForFilm- oder Video-operation the following connectors have to be ordered::
PAN-Flange
1. Power-socket Remote 12V/13A: XLR 4-p.
2. Power-socket camera 24V/13A: XLR 4-p.
3. Remote-socket: Souriau
4. Koaxsocket for Video: BNC
5. Triax-socket: Fischer
TILT-Flange
1. Power-socket camera 24V/13A: XLR 4-p.
2. Remote IIsocket for servo-elektronics: XLR 6-p.
3. Koax-socket for Video: BNC
4. Triax-socket: Fischer
5. Redlight-sensor-socket: XLR 3-p.
If the head is used for trick- and virtual studios the follwing connectors have to be ordered:
PAN-Flange
1. Power-socket Remote: XLR 4-p.
2. Remote-socket: Souriau
3. Triax-socket: Fischer
4.5-axis measurement-socket: Tuchel 12p.
TILT-Flange
1. Remote II socket for servo-elektronics: XLR 6-p.
2. Triax-socket: Fischer
3. 3-axis-measurement-socket: Tuchel 12p.
Technical Specification
Material: ALU
Class: IP53
Dimension: 67x420x15cm
Weight: 19.8kg
Payload: 40kg
Axis-movement: Pan/Tilt
Voltage: 12V
Current: 13A at full motor power
motor drive: DC-Motor
Gear drive: friction wheel (in house development)
Speed: 360° in 2s bis infinite
Encoders: hollow-shaft on axis
Resolution P/T app. 200.000 steps/360°
Pos. accuracy app. +/-0.01°
Controls: Joystick
Control-Head
Crank-Wheell
Servo-Elektronics integrated
Connection: Slip-ring; MIL-approval
Elektronics: 32 Bit processor
Interfaces: RS 232; RS 485; HDLC
Components
TR3 Crank-wheels
TR3 Control-Head
TR3 Joystick
TR3 Control-electronics
TR3 Power-Supply
TR3 Crane Distribution
TR3 Camera support plates
TR3 Red-Light-Sensor
.
