TR61 tilt-module
Description
The Tilt-module and the Pan-Module form the basis of the TR61-Remote-Head. The tilt-module follows the same design-basics using stator- and rotor-element and sealed bearings.
The stator-element is savely mounted onto the pan-drive using the carrying alu-profile as bridge.
The same joint pins and lockings are used.
The rotor-element contains all outputs. Four threaded pins are at the front-end to fit and carry the camera-carrying elements or the roll-axis.
The basic-setting has power and data connections.
The servo-setting controls zoom, focus, iris and roll-axis by means of the integrated electronics. Transmission to the devices connected is managed by an additional 6-channel slip-ring.
The complete-setting controls the camera in addition. A second 6-channel-slip-ring is integrated.
The optional input and outputs are described hereunder.
Basic design
Housing: Alu, anaodized
Length: 240mm
Diameter: 140mm
Weig ht: 5.5KG
Class: IP66
drive: Motor 24Volt, DC
bearing: sealed
gearing: precision gear-drive; -+0.01°
slip-ring: MIL-application
servo-electronics: integrated for zoom, focus, iris and roll-axis
Resolution: ca. 400.000Steps/360°
Pos.-accuracy: ca. +/-0.01°
Speed: 2sec/360° bis unendlich
Voltage: 24Volt DC
Current: 4A max
Input:
Tilt-Power: Binder 14-pol,
Optional input:
camera-power: Binder 4 pol
Sync/Video: BNC-socket
Triax: Fischer
Lens control: Binder 7 pol (power and data)
Optional output:
Camera-power: Binder 3 pol
Sync/Video: BNC
Triax: Fischer
Zoom (analog): Fischer 12 pol
Focus (analog): Fischer 12 pol
Iris (analog): Fischer 12 pol
Zoom (digital): Fischer 4 pol
Focus (digital): Fischer 4 pol
Iris (digital): Fischer 4 pol
Roll (digital): Fischer 4 pol
Camera (digital): Fischer 6 pol
Data: RS232 Binder 5 pol